Hello, Thank you for watching CarandTruckRemotes.com
video channel. Today we are going to show you how to program
a Toyota remote. This remote is programmed, this other one
isn’t, so we will show you how to do that. It’s a very easy procedure.
You just need to have your ignition key and your new remote and that’s it.
You have to start with the following conditions: The driver’s door has to be opened and unlocked,
the key has to be out of the ignition (let’s do that).
And then you put the key in the ignition and remove the key twice within 5 seconds… 1…2,
Then you have to close and open the door twice…1…2, then you have to put the key in the ignition
and remove, Then you have to close and open the door twice
Then you have to put the key in the ignition, close the door, and turn the ignition from
lock to on and back to lock once (for add mode)
Remove the key… locks and unlocks cycle, which means the vehicle went into programming
mode. And you have to press lock AND unlock buttons
for about 2 seconds, and then press the lock button.
We just programmed the second remote for the vehicle.
Ok, you have to close the door. (*click, *click) That’s the new remote. (*click, *click)
That’s the existing remote, so now we have two remotes working.
So, this procedure allows you to add the remotes, but Toyota is actually very nice because you
can add the remote, then you turn the key in the ignition at some point once, if you
turn the key on and off twice, it’s a rewrite mode, so you cancel all the existing remotes,
and just program a new one. For example: if you lost all the keys it’s
a good idea. And there are two other modes that I am not going to go into detail on because
you mainly use the Add or Rewrite. Again, thank you very much for watching our
instructional video on how to program Toyota remotes.
Those instructions can be used on most of the late model Toyota and also Lexus vehicles.
Thank you very much. Please keep watching our video channel or visit our website at
www.CarandTruckRemotes.com. You have a good day.